Product Details:
| Minimum Order Quantity | 6 Piece |
| Wattage | 150 W |
| Model Name/Number | Model Number X150C070V210FNI1BO |
| Current | 230V |
| Voltage | 230V |
| Phase | 230V |
| Warranty | 1 |
Section I - Physical Characteristics1.1 LED Driver shall be installed inside an electrical enclosure1.2 Wiring inside electrical enclosure shall comply with 600V/105 ⁰C rating or higher
Section II - Performance2.1 LED Driver has a rated lifetime of 50,000 hours @ Tc ≤ 80⁰C2.2 LED Driver tolerates sustained open circuit and short circuit output conditions without damage2.3 LED Driver maximum allowable case temperature is 80⁰C - see product label for measurement location2.4 LED Driver has Thermal Fold Back or shutdown above Tcmax, please refer to the table for typical performance2.5 LED Driver reduces output power to LEDs if its case temperature > 85 ⁰C2.6 LED Driver complies with the requirements of IS 15885 ( Part 2 / Sec 13 )
ELECTRICAL RATINGS :
ModelXitanium 150W 0.7A 240V I
Input, 50/60 HzV A240 0.67
Output ( nominal )V DC mA DC Max Watts60 - 214 700 150
TECHNICAL CONSIDERATIONS ( NOT FOR FIELD REPRESENTATIVES USE ) :Section III - Conditions of acceptabilityWhen installed in the end-use equipment, the following are among the considerations to be made :3.1 The equipment shall be installed in compliance with the enclosure, mounting, spacing, casualty and segregation requirements of the ultimate application.3.2 The driver case must be grounded in the end-use application.3.3 The driver is suitable for use in "Damp" and "Dry" locations.3.4 When the drivers are installed in the end-use application, the case temperature should not exceed the temperature limits specified in the following table:Model Input Voltage, Hz Max Case @ TC , ⁰CXitanium 150W 0.7A 240V I 240 , 50/60 803.5 The leakage current test should be repeated in the end device.Model Input Voltage, Hz Leakage Current Xitanium 150W 0.7A 240V I 240 , 50/60 0.7mA max.